Part 6 of 'Troubleshooting With an Oscilloscope' describes the T/A signal, how you can measure it, and what are common problems with this signal.
Read PostPart 5 of 'Troubleshooting With an Oscilloscope' describes the SYNC signal, how you can measure it, and what are common problems with this signal.
Read PostThe Elmo 1:1.2 25-50mm lens for Super 8 projectors is said to be very hard to disassemble. I'll describe the procedure I use.
Read PostThe Canon A-1 contains some "mysterious" wires ('SAVE adjust') that may be connected to different soldering points in different copies of the camera. I'll explain why that is.
Read PostPart 4 of 'Troubleshooting With an Oscilloscope' describes the CLK signal, how you can measure it, and what are common problems with this signal.
Read PostPart 3 of 'Troubleshooting With an Oscilloscope' explains the fundamental measurement principle when using an oscilloscope in a Canon A-1.
Read Post
